
Description
Position a WiFi antenna for equipment using the listed bands and connector interface.
Quick Specs
- Antenna connector: RP-SMA Male, coupling nut with center socket.
- Pigtail panel connector: RP-SMA Female, external thread with center pin.
- Board connector: U.FL / I-PEX compatible miniature connector.
- Pigtail cable: 1.13mm coaxial cable, 15cm
- Impedance: 50 Ω
- Frequency range: 2400–2500 MHz
- Gain: 3 dBi; omnidirectional
- VSWR: ≤ 1.50
- Polarization: Vertical
- Power handling: 20 W
- Cable construction: 15 cm, 1.13 mm miniature coax
Compatibility
| Application | Compatibility requirements |
|---|---|
| Cellular | Use equipment operating within the frequency bands in Quick Specs and with matching antenna ports. |
| WiFi | Use equipment operating within the frequency bands in Quick Specs and with matching antenna ports. |
- Check the connector gender and center contact before ordering.
- Frequency: 2.4GHz only; not a 5GHz antenna. Antenna connector: RP-SMA Male, coupling nut with center socket. Pigtail panel connector: RP-SMA Female, external thread with center pin. Board connector: U.FL / I-PEX compatible miniature connector. Check the connector gender and center contact before ordering.
Mechanical & Installation
- Antenna adjustment: 90° tilt and 360° rotation
- Termination Method: Factory preassembled cable ends with soldered center contact and crimped outer shield.
- IP Rating: Antenna: IP40; installed bulkhead end: IP65
- Operating temperature: −30°C to +75°C
Package Contents
- 2 × 2.4GHz antennas
- 2 × 15cm U.FL to RP-SMA Female pigtail cables
Product reference: OL-2613-2X
Compare related antennas. For connection checks or quantity requirements, send a custom or bulk inquiry with the product reference and mating-port details.
