1 10

YILIANDUO 1.85mm(V-Type) to 2.4mm Male Female Precision Cross-Series RF Adapter | DC-50GHz 50Ω Passivated Stainless Steel High-Frequency Millimeter Test Connector

YILIANDUO 1.85mm(V-Type) to 2.4mm Male Female Precision Cross-Series RF Adapter | DC-50GHz 50Ω Passivated Stainless Steel High-Frequency Millimeter Test Connector

$67.08 USD
$67.08 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet

Product Overview

YILIANDUO is a precision air-dielectric cross-series millimeter-wave adapter engineered for signal conversion between 1.85mm(V-type) female and standard 2.4mm male RF interfaces, stably rated for continuous DC~50GHz full-band operation. Built with passivated anti-corrosion stainless steel housing and gold-plated beryllium copper inner contact, this professional interconnect solves conversion challenges between 1.85mm max 67GHz ultra-high-frequency test gear and mainstream 2.4mm 50GHz millimeter-wave modules, exclusively mechanically compatible with 1.85 & 2.4mm series only (not mateable with SMA/3.5mm/K-type 2.92mm).

This premium RF component targets dual-market demand: B2B bulk sourcing for global RF distributors, aerospace defense factories, automotive millimeter radar manufacturers and 5G mmWave R&D enterprises, plus B2C university high-frequency lab researchers, measurement engineers and RF DIY specialists for VNA calibration & custom test fixture assembly. It’s a cost-effective drop-in replacement for high-cost imported adapters from Fairview, SV Microwave and TE Connectivity.

Features

✅ Exclusive Cross Transition:1.85mm(V) Female ↔2.4mm Male | Only 1.85/2.4 Interoperable
Industry-standard air interface design; mechanically mates directly between 1.85mm(V) and 2.4mm without hardware damage, incompatible with SMA/3.5/2.92(K) to avoid mismatched connector damage, standardized for professional high-frequency lab setup.

✅ Premium Passivated Stainless Steel & Wide Temperature Resistance
Full stainless steel housing with chemical passivation removes free iron to eliminate secondary rust/oxidation; stable mechanical performance across -55℃ ~ +165℃ extreme ambient for airborne, outdoor and variable-temperature industrial testing; gold-plated inner pin boosts wear for hundreds of repeated mating cycles.

✅ Excellent DC~50GHz Full-Band Electrical Specs
  • Standard industry 50Ω characteristic impedance for all millimeter-wave RF circuits
  • Max VSWR ≤1.25 across full DC-50GHz working spectrum
  • Ultra-low max insertion loss ≤0.05dB to minimize high-frequency signal attenuation & waveform distortion
✅ Air-Dielectric Precision Structure for Millimeter Wave
Both 1.85(V) &2.4mm adopt air-spaced inner insulation instead of solid dielectric, drastically cut parasitic high-frequency loss, far superior to conventional low-frequency SMA connectors limited below 18GHz.

✅ All-Metal Closed EMI Shielding
Integrated full-metal shielding shell suppress external electromagnetic interference, keep steady signal integrity under high-vibration radar & aerospace testing; exclusively for ≥30GHz millimeter-wave, unsuitable for below-1GHz low-frequency wiring.
Specifications
Parameter Detailed Technical Data
Brand YILIANDUO

100% Brand New
Manufacturer yilianduo
Connector Type 1.85mm(V-Type) to 2.4mm Male Female Straight Cross-Series
Nominal Impedance 50 Ohm
Rated Working Frequency DC ~ 50GHz
1.85mm Max Peak Test Up to 67GHz
Max VSWR ≤1.25:1
Maximum Insertion Loss ≤0.05dB
Body Material Passivated Stainless Steel
Inner Contact Gold-plated Beryllium Copper
Operating Temp -55℃ ~ +165℃
Mechanical Compatibility Only 1.85mm ↔2.4mm (Not SMA/3.5/2.92 compatible)
Core Application High-End VNA Calibration,5G mmWave,Automotive 77GHz Radar,Aerospace Defense RF Test

 

Applications

1. Advanced University & R&D Laboratory Research

High-end VNA vector network analyzer calibration, 50GHz millimeter-wave component parameter testing, mixed 1.85/2.4 multi-standard experimental test jig development。

2. 5G/6G Telecommunication Industry

5G millimeter phased array antenna debugging, high-frequency compact base station RF front-end interconnection, satellite high-band ground station communication module verification。

3. Aerospace & Defense Electronics

Airborne millimeter radar internal wiring, aerospace satellite onboard high-frequency equipment assembly, military electronic warfare RF test fixture wiring。

4. Automotive Electronic R&D

77GHz vehicle anti-collision millimeter radar PCB calibration, ADAS high-frequency RF sensor prototype testing, autonomous driving high-band module debugging。

5. Precision RF Maintenance & Custom DIY

Ultra-high-frequency lab equipment repair, custom high-density millimeter-wave test jig modification, advanced experimental wideband circuit upgrade。

📦 Package Includes

  • 1 × Millimeter Wave RF Adapter 

Important Usage Notes

  • Designed exclusively for DC~50GHz millimeter-wave measurement, avoid low-frequency wiring below 1GHz.
  • Apply moderate torque during threading; over-tightening will deform precision gold-plated inner pin and ruin electrical performance.
  • Store in dry dustproof container to protect precision plating against moisture corrosion.

Why Choose YILIANDUO

For B2B Wholesale Buyers

✔️ Factory direct supply with tiered bulk discount, customizable OEM/ODM interface specs for global RF distributors & aerospace component suppliers
✔️ Every unit passes full DC-50GHz electrical inspection before shipment to ensure consistent batch parameters for large enterprise procurement
✔️ Compact shockproof packaging optimized for cross-border logistics & overseas warehouse stocking

For B2C R&D Engineers & Lab Users

✔️ Budget-friendly alternative to expensive name-brand (Fairview/TE/SV Microwave) cross adapters with identical industrial precision
✔️ International standard dimension, fully interchangeable with mainstream high-end VNA and commercial 1.85/2.4mm test instruments

FAQ

Q1: Can this adapter connect to SMA or 3.5mm connectors?

A: No, 1.85 &2.4mm only mechanically compatible with each other, cannot mate with SMA/3.5/2.92mm to prevent connector damage.

Q2: Can the 1.85 side do temporary testing up to 67GHz?

A: 1.85(V-type) structural max 67GHz; continuous long-term working should stay within rated DC~50GHz.

Q3: Is bulk discount available for lab/enterprise big orders?

A: Volume preferential pricing for orders over 50pcs; contact sales team for customized wholesale quotation.

Q4: What’s passivated stainless steel advantage?

A: Passivation removes free iron to stop rust & oxidation, stable performance under wide-range fluctuating temperature environment.

Maßgeschneiderte Dienstleistungen

Wir bieten maßgeschneiderte Dienstleistungen an. Wenn Sie ein spezielles Produkt benötigen, kontaktieren Sie uns bitte.

Versandarten

Standardversand ist standardmäßig ausgewählt. Bestellungen über 200 $ werden automatisch auf Expressversand hochgestuft.

Qualitativ hochwertiger Service

Wenn Sie sich für YILIANDUO entscheiden, profitieren Sie von persönlichem After-Sales-Service.

Vollständige Details anzeigen
Variante Varianten insgesamt Anzahl Preis Varianten insgesamt
YILIANDUO 1.85mm(V-Type) to 2.4mm Male Female Precision Cross-Series RF Adapter | DC-50GHz 50Ω Passivated Stainless Steel High-Frequency Millimeter Test Connector
1.85mm Male to 2.4mm FemaleOL-6117
1.85mm Male to 2.4mm FemaleOL-6117
$67.08/Stück		 $0.00
$67.08/Stück $0.00
YILIANDUO 1.85mm(V-Type) to 2.4mm Male Female Precision Cross-Series RF Adapter | DC-50GHz 50Ω Passivated Stainless Steel High-Frequency Millimeter Test Connector
1.85mm Male to 2.4mm MaleOL-6110
1.85mm Male to 2.4mm MaleOL-6110
$67.26/Stück		 $0.00
$67.26/Stück $0.00
YILIANDUO 1.85mm(V-Type) to 2.4mm Male Female Precision Cross-Series RF Adapter | DC-50GHz 50Ω Passivated Stainless Steel High-Frequency Millimeter Test Connector
1.85mm Female to 2.4mm FemaleOL-6099
1.85mm Female to 2.4mm FemaleOL-6099
$67.34/Stück		 $0.00
$67.34/Stück $0.00
Warenkorb ansehen
0

Artikel gesamt

$0.00

Produktzwischensumme

Steuern, Rabatte und Versand werden beim Checkout berechnet.
Warenkorb ansehen