1
/
の
10
YILIANDUO 1.85mm(V-Type) to 2.4mm Male Female Precision Cross-Series RF Adapter | DC-50GHz 50Ω Passivated Stainless Steel High-Frequency Millimeter Test Connector
YILIANDUO 1.85mm(V-Type) to 2.4mm Male Female Precision Cross-Series RF Adapter | DC-50GHz 50Ω Passivated Stainless Steel High-Frequency Millimeter Test Connector
通常価格
$67.08 USD
通常価格
セール価格
$67.08 USD
配送料はチェックアウト時に計算されます。
Product Overview
YILIANDUO is a precision air-dielectric cross-series millimeter-wave adapter engineered for signal conversion between 1.85mm(V-type) female and standard 2.4mm male RF interfaces, stably rated for continuous DC~50GHz full-band operation. Built with passivated anti-corrosion stainless steel housing and gold-plated beryllium copper inner contact, this professional interconnect solves conversion challenges between 1.85mm max 67GHz ultra-high-frequency test gear and mainstream 2.4mm 50GHz millimeter-wave modules, exclusively mechanically compatible with 1.85 & 2.4mm series only (not mateable with SMA/3.5mm/K-type 2.92mm).
This premium RF component targets dual-market demand: B2B bulk sourcing for global RF distributors, aerospace defense factories, automotive millimeter radar manufacturers and 5G mmWave R&D enterprises, plus B2C university high-frequency lab researchers, measurement engineers and RF DIY specialists for VNA calibration & custom test fixture assembly. It’s a cost-effective drop-in replacement for high-cost imported adapters from Fairview, SV Microwave and TE Connectivity.
Features
✅ Exclusive Cross Transition:1.85mm(V) Female ↔2.4mm Male | Only 1.85/2.4 Interoperable
Industry-standard air interface design; mechanically mates directly between 1.85mm(V) and 2.4mm without hardware damage, incompatible with SMA/3.5/2.92(K) to avoid mismatched connector damage, standardized for professional high-frequency lab setup.
✅ Premium Passivated Stainless Steel & Wide Temperature Resistance
Full stainless steel housing with chemical passivation removes free iron to eliminate secondary rust/oxidation; stable mechanical performance across -55℃ ~ +165℃ extreme ambient for airborne, outdoor and variable-temperature industrial testing; gold-plated inner pin boosts wear for hundreds of repeated mating cycles.
✅ Excellent DC~50GHz Full-Band Electrical Specs
- Standard industry 50Ω characteristic impedance for all millimeter-wave RF circuits
- Max VSWR ≤1.25 across full DC-50GHz working spectrum
- Ultra-low max insertion loss ≤0.05dB to minimize high-frequency signal attenuation & waveform distortion
✅ Air-Dielectric Precision Structure for Millimeter Wave
Both 1.85(V) &2.4mm adopt air-spaced inner insulation instead of solid dielectric, drastically cut parasitic high-frequency loss, far superior to conventional low-frequency SMA connectors limited below 18GHz.
✅ All-Metal Closed EMI Shielding
Integrated full-metal shielding shell suppress external electromagnetic interference, keep steady signal integrity under high-vibration radar & aerospace testing; exclusively for ≥30GHz millimeter-wave, unsuitable for below-1GHz low-frequency wiring.
Specifications
| Parameter | Detailed Technical Data |
|---|---|
| Brand | YILIANDUO |
| 100% Brand New | |
| Manufacturer | yilianduo |
| Connector Type | 1.85mm(V-Type) to 2.4mm Male Female Straight Cross-Series |
| Nominal Impedance | 50 Ohm |
| Rated Working Frequency | DC ~ 50GHz |
| 1.85mm Max Peak Test | Up to 67GHz |
| Max VSWR | ≤1.25:1 |
| Maximum Insertion Loss | ≤0.05dB |
| Body Material | Passivated Stainless Steel |
| Inner Contact | Gold-plated Beryllium Copper |
| Operating Temp | -55℃ ~ +165℃ |
| Mechanical Compatibility | Only 1.85mm ↔2.4mm (Not SMA/3.5/2.92 compatible) |
| Core Application | High-End VNA Calibration,5G mmWave,Automotive 77GHz Radar,Aerospace Defense RF Test |
Applications
1. Advanced University & R&D Laboratory Research
High-end VNA vector network analyzer calibration, 50GHz millimeter-wave component parameter testing, mixed 1.85/2.4 multi-standard experimental test jig development。
2. 5G/6G Telecommunication Industry
5G millimeter phased array antenna debugging, high-frequency compact base station RF front-end interconnection, satellite high-band ground station communication module verification。
3. Aerospace & Defense Electronics
Airborne millimeter radar internal wiring, aerospace satellite onboard high-frequency equipment assembly, military electronic warfare RF test fixture wiring。
4. Automotive Electronic R&D
77GHz vehicle anti-collision millimeter radar PCB calibration, ADAS high-frequency RF sensor prototype testing, autonomous driving high-band module debugging。
5. Precision RF Maintenance & Custom DIY
Ultra-high-frequency lab equipment repair, custom high-density millimeter-wave test jig modification, advanced experimental wideband circuit upgrade。
📦 Package Includes
- 1 × Millimeter Wave RF Adapter
Important Usage Notes
- Designed exclusively for DC~50GHz millimeter-wave measurement, avoid low-frequency wiring below 1GHz.
- Apply moderate torque during threading; over-tightening will deform precision gold-plated inner pin and ruin electrical performance.
- Store in dry dustproof container to protect precision plating against moisture corrosion.
Why Choose YILIANDUO
For B2B Wholesale Buyers
✔️ Factory direct supply with tiered bulk discount, customizable OEM/ODM interface specs for global RF distributors & aerospace component suppliers
✔️ Every unit passes full DC-50GHz electrical inspection before shipment to ensure consistent batch parameters for large enterprise procurement
✔️ Compact shockproof packaging optimized for cross-border logistics & overseas warehouse stocking
For B2C R&D Engineers & Lab Users
✔️ Budget-friendly alternative to expensive name-brand (Fairview/TE/SV Microwave) cross adapters with identical industrial precision
✔️ International standard dimension, fully interchangeable with mainstream high-end VNA and commercial 1.85/2.4mm test instruments
FAQ
Q1: Can this adapter connect to SMA or 3.5mm connectors?
A: No, 1.85 &2.4mm only mechanically compatible with each other, cannot mate with SMA/3.5/2.92mm to prevent connector damage.
Q2: Can the 1.85 side do temporary testing up to 67GHz?
A: 1.85(V-type) structural max 67GHz; continuous long-term working should stay within rated DC~50GHz.
Q3: Is bulk discount available for lab/enterprise big orders?
A: Volume preferential pricing for orders over 50pcs; contact sales team for customized wholesale quotation.
Q4: What’s passivated stainless steel advantage?
A: Passivation removes free iron to stop rust & oxidation, stable performance under wide-range fluctuating temperature environment.
Customized Services
Customized Services
We offer custom services. If you need a specific product, please contact us.
Shipping Methods
Shipping Methods
Standard shipping is selected by default. Orders over $200 are automatically upgraded to Express shipping.
High Quality Service
High Quality Service
When you choose YILIANDUO , enjoy personalized after-sales service.
Share
★★★★★
Be The First to Write a Review
★
★
★
★
★
Upload Photos/Videos (Max 3 files, JPG/PNG/GIF/MP4)
Customer Reviews
No reviews yet