
Connect a matching dual Fakra Z vehicle antenna connection to a DIN male radio connection with this 15cm RG174 adapter cable.
Quick Specs
- Vehicle-side connection: Dual Fakra Z male
- Radio-side connection: DIN male
- Cable: RG174 coaxial cable
- Length: 15cm (approximately 6in)
- Listed impedance: 50 Ohm
- Short cable for routing between a compatible vehicle antenna harness and radio.
- Dual Fakra Z and DIN interfaces in one adapter assembly.
- Frequency range: Not specified for this assembly; confirm the operating band.
- VSWR: Not specified.
Compatibility
| Application | Compatibility requirements |
|---|---|
| Vehicle / head unit | Exact make, model, year and head-unit fitment are not specified. Compare the original connector, keying and wiring. |
| Antenna / signal path | Match the listed Fakra/DIN interfaces and check antenna power, diversity and signal-routing requirements. |
- For car-radio antenna installations where both the connector layout and antenna circuit match.
- Check the housing key, center contacts, connector spacing and available room behind the radio.
- Confirm any antenna power-feed or diversity requirements of the vehicle and replacement radio.
- Compare the actual antenna plugs and radio input. This cable alone does not add DAB reception or replace a tuner.
Mechanical & Installation
- Check connector clearance and support attached cables during installation.
- IP Rating: Not specified. Protect exposed joints and cable entries as required by the installation.
Package Contents
- 1 dual Fakra Z male to DIN male antenna adapter cable.
Product reference: OL-6269