RP-SMA Female to MHF4 IPX Pigtail Cables, 0.81mm 50Ω, 5–50cm, Bulkhead, 2-Pack

Description

Buy RP-SMA female to MHF4 pigtail cables from YILIANDUO in 5cm, 10cm, 15cm, 25cm or 50cm lengths. Each option supplies two 0.81mm, 50Ω coaxial assemblies with an RP-SMA female bulkhead connector (center pin), an MHF4 board-side connector, mounting nuts and washers. Select the length below, then check the selected option's current stock status and delivery information on this product page.

Free shipping for U.S. orders

Free shipping on all orders to supported destinations, including the United States. Orders below US$200 use Standard shipping. Orders of US$200 or more automatically receive a free Express upgrade. Confirm the service for your address at checkout.

Order processing and carrier transit are separate. For a deadline or bulk requirement, confirm the expected dispatch date and delivery estimate before ordering. See our U.S. shipping information and return policy.

Choose a cable length and SKU

Lengths are listed in centimetres; inch values are approximate conversions, not separate inch-size products. For a dimension-critical installation, confirm the assembly's length measurement points and tolerance before ordering.

How to choose between 5cm and 50cm

Measure the actual cable route from the board receptacle to the bulkhead, including bends and clearance. Choose the shortest listed length that reaches without pulling on the miniature connector. Leave room to route and support the cable; do not assume that a longer cable will improve reception. For a step-by-step check, use our RP-SMA to MHF4 length-selection guide.

Quick Specs

• Board-side connector: MHF4 IPX
• Panel-side connector: RP-SMA female bulkhead; center pin
• Available cable lengths: 5cm, 10cm, 15cm, 25cm and 50cm
• Impedance: 50 Ω
• Cable construction: 0.81 mm miniature coax; 7 × 0.05 mm silver-plated copper conductor, FEP dielectric and jacket, tinned-copper shielding
• Frequency range: DC–6 GHz
• VSWR: ≤ 1.35
• Insertion loss / attenuation: At 2.4 GHz: ≤ 0.45 dB for 5–15 cm assemblies; ≤ 0.95 dB for 25–50 cm assemblies

Confirm the miniature interface before ordering

MHF4 and U.FL are different interfaces. Check the exact receptacle part number and mating drawing on your board; “IPX”, “Mini PCIe” or “M.2” alone does not identify the connector. Use the I-PEX MHF 4 family documentation as an interface reference and our drawing and specification checklist to distinguish interface-family information from assembly-specific data. The reference does not identify this assembly as an original I-PEX part or supply test data for it.

If the threaded end is uncertain, compare the SMA and RP-SMA connector photographs. This RP-SMA female assembly has a center pin; the separate SMA female to MHF4 assembly has a center socket.

Compatibility

• These cables use MHF4 IPX at the board end. Check the exact receptacle rather than selecting by Mini PCIe or M.2 card format alone. The 0.81mm specification identifies the cable type, not the cable length.

Mechanical & Installation

• Check connector clearance and support attached cables during installation.
• Termination Method: Factory preassembled cable ends with soldered center contact and crimped outer shield.
• IP Rating: IP20 at the board connector; bulkhead SMA/RP-SMA end: IP65 when installed with an O-ring
• Operating temperature: −40°C to +85°C

Package Contents

2 pigtail cables in the selected length, with mounting nuts and washers.

Product reference: OL-4012-2X / OL-4008-2X / OL-4010-2X / OL-4014-2X / OL-4016-2X

Compare related coaxial cables. For connector checks or quantity requirements, send a custom or bulk inquiry with the product reference and mating-port details.