
Description
Route a matching RP-SMA Female to U.FL connection through the available installation space.
Quick Specs
- Panel connector: RP-SMA female bulkhead; center pin
- Board connector: U.FL / IPX miniature coax connector
- Cable: 1.13mm coax; 17cm
- Impedance: 50 Ω
- Cable construction: 1.13 mm miniature coax; silver-plated copper conductor, FEP dielectric and black jacket, high-density braided shielding
- Frequency range: DC–6 GHz
- VSWR: ≤ 1.35
- Insertion loss / attenuation: 5–20 cm assembly loss: ≤ 0.35–0.55 dB at 2.4 GHz, depending on length
Compatibility
| Application | Compatibility requirements |
|---|---|
| Equipment interface | Match the connector families, genders and center contacts listed in Quick Specs. |
| Electrical requirements | Check the operating band, impedance and pin assignment of the complete connection. |
- Confirm the exact board receptacle. U.FL and MHF4 are different interfaces; a Mini PCIe or WiFi label alone does not identify the required plug.
Mechanical & Installation
- Check connector clearance and support attached cables during installation.
- Termination Method: Factory preassembled cable ends with soldered center contact and crimped outer shield.
- IP Rating: IP20 at the board connector; bulkhead SMA/RP-SMA end: IP65 when installed with an O-ring
- Operating temperature: −40°C to +85°C
Package Contents
5 pigtail cables.
Product reference: OL0559-5X
Compare related coaxial cables. For connection checks or quantity requirements, send a custom or bulk inquiry with the product reference and mating-port details.
